Aerosure · Technician range
Aerosure AC Foam Cleaner 500 mL: split AC coil cleaning without a pressure washer
Aerosure AC Foam Cleaner is a 500 mL expanding foam aerosol for split and window AC coils, made by InnovaChem Systems LLP. Spray it evenly across the coil and the foam works between the fins to lift dust and grease. Then rinse gently or let it drain, as the label says. No pressure washer is needed.
- DPIIT recognised · DIPP258886
- ISO 9001:2015
- GMP (IAF)
- Own aerosol filling line
- MSDS on request · CoA with every batch
What are the Aerosure AC Foam Cleaner 500 mL specifications?
| Volume | 500 mL aerosol |
|---|---|
| Use on | Indoor evaporator coils of split and window ACs |
| Rinse | Rinse or no-rinse as stated on the label |
| Keep off | Electrical parts, control boards and motors |
| Documents | SDS on request |
Coverage per can, pH and shelf life are on the label and SDS. Ask us for the SDS.
How do you use Aerosure AC Foam Cleaner 500 mL?
- Power off and expose the coil. Switch off the AC and isolate power, open the access panel, protect nearby electrical parts from moisture, and wear gloves and eye protection.
- Remove loose dirt. Use a soft brush or vacuum to remove loose dust, brushing in the direction of the fins.
- Apply AC Foam Cleaner. Shake the can and spray the foam evenly across the coil at the distance on the label. Let it penetrate. Keep it off electrical parts.
- Rinse or drain, then restore. Follow the label rinse or no-rinse instructions, use gentle low-pressure water if rinsing, let it drain, refit the panel and restore power only when dry.
Full guide with photos and sources: How to clean a split AC coil with foam: 4-step SOP.
Technician tips
- Isolate the power before you open the panel.
- Brush along the fins, never across them, before you spray.
- Hold the nozzle at the distance on the label and sweep evenly.
- Switch on only when the unit has drained and is dry.
Safety
Read the label and SDS before use. Wear gloves and eye protection. Keep sprays away from heat and flame, and off live electrical parts.
Which jobs is it for?
Where can you buy it?
Technicians, AMC companies and service networks buy direct at trade prices. Distributors get territory margins.
Reviews
We publish only genuine, verified buyer reviews. None are listed yet.
What mistakes should you avoid with Aerosure AC Foam Cleaner 500 mL?
- Spraying with the power still on.
- Cleaning the coil but not the filter, drain tray and blower wheel.
- Rinsing with a high-pressure jet that bends the fins.
- Skipping the rinse, so loosened dirt dries back on the coil.
How do you check the clean worked?
- Airflow at the grille is strong and even.
- The drain runs clear and the tray is empty after a test run.
- The musty smell has gone after the first cooling cycle.
- The customer sees a clean filter and coil before you close the panel.
How should you store and handle Aerosure AC Foam Cleaner 500 mL?
- Aerosol cans are pressurised: keep away from heat, sparks and open flame, and never puncture or burn a can, even when empty.
- Work only with the power isolated and keep sprays off live electrical parts.
- Wear gloves and eye protection, and store cans upright below 50 °C, out of direct sun.
- Read the SDS before first use and keep it where the product is used.
What should you tell us for a quote on Aerosure AC Foam Cleaner 500 mL?
- How many units you service in a month and your city
- Indoor or outdoor coils, and whether sites are coastal, industrial or inland
- Cans per month, or cases if you buy for a team
- Whether you want trade pricing or distributor terms
We reply within one working day with a price, the SDS and TDS, and a suggested dose to validate on site.
Aerosure AC Foam Cleaner 500 mL: quick answers
How do you use Aerosure AC Foam Cleaner?
Isolate the power and open the panel. Brush off loose dust along the fins. Shake the can and spray the foam evenly across the coil, keeping it off electrical parts. Follow the label for rinse or no-rinse use, then restore power only when the unit is dry.
Do I need a pressure washer?
No. The foam penetrates between the fins and loosens dirt. If the label asks for a rinse, use gentle low-pressure water. A pressure washer can bend fins.
Can I spray it on electrical parts?
No. Keep the foam off control boards, motors and wiring, and protect them from moisture before you spray.
Stock Aerosure for your service team
Trade pricing on cases, delivered across India. We reply within one working day.
AC maintenance numbers to know
| What | Typical range |
|---|---|
| Clean or replace filters | Every 1 to 2 months in the cooling season, sooner in dust [source] |
| Energy saved by a clean filter | 5% to 15% less energy than with a clogged filter [source] |
| Check the indoor (evaporator) coil | Every 12 months; clean when dirty [source] |
| Drain line | Clear it at each service so water cannot back up [source] |
| Star label | Compare models by BEE star rating and ISEER [source] |