INNOVA · Equipment
Foam cleaning machine for dairy and food plants (SS 304, 40 L)
A foam cleaning machine mixes detergent, water and compressed air into a foam that clings to walls, conveyors, tanks and crates. The INNOVA unit is air-operated SS 304 with a 40 L tank, a 10 m hose and 4 to 5 bar air. The foam stays for 20 to 25 minutes, removing fat, protein and biofilm with less water.
- DPIIT recognised · DIPP258886
- ISO 9001:2015
- GMP (IAF)
- Own aerosol filling line
- MSDS on request · CoA with every batch
Specifications
| Material | Stainless steel 304 |
|---|---|
| Tank | 40 litres |
| Hose | 10 m reinforced PVC |
| Air pressure | 4 to 5 bar |
| Power | Air operated |
| Contact time | 20 to 25 minutes |
Price on request. Weight, dimensions and warranty terms are on the quote.
Where it is used
- BMC and chilling rooms
- Packing halls and filler exteriors
- Conveyors and tank exteriors
- Crates and trays
- Floors, walls and drains
How it works
- Fill. Fill the 40 L tank with the INNOVA foam detergent diluted as the TDS says.
- Foam. Connect 4 to 5 bar compressed air and apply the foam from the bottom of each surface up.
- Rinse. Leave it for the contact time, then rinse from the top down with low-pressure water.
Chemical pairing
| INNOVA product | Job | Dilution and contact time |
|---|---|---|
| INNOVA Chlorfoam | Heavy fat and protein soil on floors, walls and equipment | As stated on the TDS |
| INNOVA DegreasePro | Heavy grease on machinery and fryer areas | As stated on the TDS |
| INNOVA Teepol HD | Mild cleaning of sensitive surfaces | As stated on the TDS |
| INNOVA QuatShield | Quat-based cleaning and disinfection after the clean | As stated on the TDS |
Foam cleaning vs manual scrubbing
| Foam cleaning | Manual scrubbing | |
|---|---|---|
| Contact time on walls | Foam clings for 20 to 25 minutes | Liquid runs off in seconds |
| Coverage | Large areas from one hose | One brush width at a time |
| Water | Less water for the same clean | More water and repeat rinses |
| Consistency | Same foam every time | Depends on the operator |
| Visibility | You can see where foam has been applied | Missed spots are hard to see |
Book a demo
We clean one zone with you
We bring the foam machine and the chemistry, and clean one area with your team. You see the result before you buy.
Service: we train your operators at handover and support the machine after sale. Ask about annual maintenance when you request a quote.
Foam Cleaning Machine: quick answers
What does a foam cleaning machine do in a food plant?
It turns cleaning chemical into a clinging foam and sprays it onto walls, floors, tank exteriors and conveyors. Foam stays on vertical surfaces longer than a liquid spray, so the chemistry has more contact time with less water.
Which INNOVA chemicals are used with the foam machine?
A chlorinated alkaline foam such as INNOVA Chlorfoam for the clean, followed by a sanitiser such as INNOVA PAA 15.
Can we see the equipment working before we buy?
Yes. We bring the foam machine and the chemistry, and clean one zone with your team.
What air pressure does the foam machine need?
The INNOVA foam cleaning machine runs on 4 to 5 bar compressed air. It has no electric motor.
How long should foam stay on the surface?
The INNOVA unit gives 20 to 25 minutes of foam contact time. Use the contact time on the detergent TDS, then rinse before the foam dries.
Pair the right chemistry with the right machine
Tell us the area, the soil and your audit standard. We reply within one working day.