INNOVA · CIP, dairy & food processing
INNOVA PAA 15: peracetic acid cold sanitiser, no-rinse grade
INNOVA PAA 15 is a peracetic acid sanitiser, no-rinse grade made by InnovaChem Systems LLP in Greater Noida, India. A 15% peracetic acid sanitiser for cold CIP disinfection of lines, tankers and fillers, and for no-rinse sanitising of plant surfaces. Active at low temperature, with no rinse required. Packs: 5 kg and 30 kg packs. Dose, temperature and contact time are on the TDS, sent on request.
- DPIIT recognised · DIPP258886
- ISO 9001:2015
- GMP (IAF)
- Own aerosol filling line
- MSDS on request · CoA with every batch
What are the INNOVA PAA 15 specifications?
| Product | INNOVA PAA 15 |
|---|---|
| Type | Peracetic acid sanitiser, no-rinse grade |
| Category | CIP, dairy & food processing |
| Pack sizes | 5 / 30 kg |
| Dose, temperature, contact time | On the TDS, sent on request |
| Documents | SDS and TDS on request · CoA with every batch |
| Made by | InnovaChem Systems LLP, Greater Noida West, India |
| Certifications | ISO 9001:2015 · GMP (IAF) |
What makes INNOVA PAA 15 different?
- No rinse, no residue
- Works where there is no hot water
- Broad-spectrum microbial control
Where can you use INNOVA PAA 15?
- CIP and COP: Milk silos, pasteurisers, heat exchangers, pipelines. Alkaline and acid in sequence, then sanitiser.
- Foam cleaning: Walls, floors, tank exteriors, conveyors. Chlorinated alkaline foam, then sanitiser.
- Cold, no-rinse sanitiser before the next collection.
- Cold sanitiser.
- no-rinse between shifts.
Where not to use: check the TDS before use on aluminium, galvanised steel, soft metals or coated surfaces. Never mix with other chemicals.
How do you use INNOVA PAA 15?
- Clean first: a sanitiser cannot work through soil.
- Rinse and drain.
- Apply INNOVA PAA 15 by circulation, spray, foam or fogging at the concentration on the TDS.
- Leave for the contact time. No rinse is needed.
What dose, temperature and contact time are typical?
These are typical ranges from published guidance for this type of product, to help you plan. The INNOVA PAA 15 TDS gives its exact dose, temperature and contact time; where they differ, follow the TDS.
| What | Typical range |
|---|---|
| Working strength | 100 to 200 ppm peracetic acid, about 0.7 to 1.3 mL of a 15% product per litre [source] |
| No-rinse limit on food-contact surfaces | Up to 200 ppm peracetic acid with up to 1,100 ppm hydrogen peroxide [source] |
| Farm final rinse example | About 0.13 to 0.15% product, no further rinse [source] |
| Temperature | Cold or ambient water |
What does INNOVA PAA 15 pair with?
- INNOVA CIP 50Formulated alkaline CIP cleaner
- INNOVA CanCleanCan and container cleaner
- ULV Fogging MachineULV fogging equipment
Which problems does INNOVA PAA 15 solve?
- How to clean a bulk milk cooler (BMC): procedure and chemicals
- Milk can cleaning: chemicals and washing procedure
- How to cut CIP energy, water and chemical cost in a dairy plant
- Biofilm in dairy lines: why CIP fails and how to remove it
- FSSAI Schedule 4 cleaning and sanitation requirements for dairy
- Milk tanker cleaning: CIP procedure for road tankers
- Beverage line CIP and sanitation
- Meat and poultry plant sanitation chemicals
Which documents come with INNOVA PAA 15?
- Food-grade certification, SDS and TDS on request.
- Certificate of analysis (CoA) with every batch.
- Supports the documented cleaning programme FSSAI Schedule 4 asks for: FSSAI Schedule 4 cleaning checklist.
- SDS and TDS library
What mistakes should you avoid with INNOVA PAA 15?
- Sanitising a surface that is still dirty: soil uses up the sanitiser.
- Making the solution too strong, which leaves residue, or too weak, which leaves microbes.
- Mixing with acids, chlorine or other chemicals.
- Using a solution made the day before.
- Wiping or rinsing off before the contact time ends.
How do you check the clean worked?
- A test strip confirms the working strength in ppm.
- ATP or swab counts on food-contact surfaces pass your limit.
- The sanitising step and strength are logged on the cleaning record.
How should you store and handle INNOVA PAA 15?
- Oxidising sanitisers such as peracetic acid, hydrogen peroxide and hypochlorite must never be mixed with each other, with acids or with other chemicals.
- Store cool, out of direct sun and away from organic material, in the vented original container.
- Wear gloves and eye protection when handling the concentrate, and make up only the solution you need for the shift.
- Read the SDS before first use and keep it where the product is used.
What should you tell us for a quote on INNOVA PAA 15?
- The equipment or surface you clean, and the soil (fat, protein, scale, oil)
- Your water hardness, if known, and the wash temperature you can reach
- Pack size and monthly volume
- Your city, and whether you want a sample or a site trial first
We reply within one working day with a price, the SDS and TDS, and a suggested dose to validate on site.
INNOVA PAA 15: quick answers
What is INNOVA PAA 15 used for?
INNOVA PAA 15 is a peracetic acid sanitiser, no-rinse grade. A 15% peracetic acid sanitiser for cold CIP disinfection of lines, tankers and fillers, and for no-rinse sanitising of plant surfaces. Active at low temperature, with no rinse required.
What pack sizes is INNOVA PAA 15 available in?
INNOVA PAA 15 is supplied in 5 kg and 30 kg packs. Tell us your monthly volume and we suggest the right pack.
Where is INNOVA PAA 15 used?
CIP and COP: Milk silos, pasteurisers, heat exchangers, pipelines. Alkaline and acid in sequence, then sanitiser. Foam cleaning: Walls, floors, tank exteriors, conveyors. Chlorinated alkaline foam, then sanitiser. Cold, no-rinse sanitiser before the next collection.
What dose and temperature should I use for INNOVA PAA 15?
Use the dose, temperature and contact time on the INNOVA PAA 15 technical data sheet. They depend on your soil, water hardness and equipment, so we confirm them after a site visit or trial.
What ppm of peracetic acid is used for no-rinse sanitising?
Typically 100 to 200 ppm peracetic acid. US FDA rules (21 CFR 178.1010) allow up to 200 ppm on food-contact surfaces without a rinse. With a 15% product that is about 0.7 to 1.3 mL per litre.
How do I get the SDS, TDS and price for INNOVA PAA 15?
Ask the InnovaChem team through the quote form, on +91 78277 29936 or at contact@innovachem.in. We share the SDS and TDS on request, quote by pack size and volume, and send a certificate of analysis with every batch.
Talk to us about INNOVA PAA 15
Tell us the application, pack size and monthly volume. We reply within one working day.